3-3.
CD MECHANISM DECK (CDM66-5BD27)
8 CD mechanism deck
– BOTTOM VIEW –
1 tapering driver
2
3 panel, loading
3-4.
MAIN BOARD
1 connector (CN602)
5 three screws
(BVTP3
8)
(CDM66-5BD27)
Note: When the power supply does not turn on,
rotate the cam with tepering driver ( 3 mm) as the figure shows,
and the loading panel will be moved.
2 wire (flat type) (21core)
(CN651)
2 wire (flat type) (17core)
(CN621)
7 connector (CN151)
6
4 two screws
(BVTP3
8)
5 main board
CDP-XE270/XE370
4 wire (flat type) (21core)
3 four screws
(BVTP3
8)
7