Sharp AR-BC320 Service Manual page 280

(6-3) Click the "Device manager." Click the "Port (COM/
LPT)" and double-click the "Communication port
(COM*)" to be used.
(6-4) Open the "Port setup" tab, and enter "115200" in the
column of bit/sec.
If the above communication speed cannot be set,
select and set one of the following speeds.
9600/19200/38600/57600
In the case of Windows 2000:
(6-1) Open the "Control panel."
(6-2)
Double-click
(6-3)
(6-4)
AR-BC320 ROM VERSION UP 12 - 7
Open the "System."
Select the "Device manager (D)" on the hardware
menu.
Click the "Port (COM/LPT)" and douche-click the "Com-
munication port (COM*)" to be used.
Double-click