Cautions For The Replacement Of Damaged Power Supply Cord - Roland CUBE 30 Service Notes

Jul.2002
CAUTIONS FOR THE REPLACEMENT OF DAMAGED
POWER SUPPLY CORD
100V ZP90420 -
117V,230V,230VE ZQ02580 -
240VA ZP91180 -
Please refer to the follwing "Notes" and confrim the Serial number when you replace the power supply cord.
Notes
1.
The distance between terminal (included the part of winding the wire) is more than 6mm (refer to Fig.1).
fig.30ac1
COMMON
6mm min
HOT
2.
Please wind the wire around the terminal 1.5 times before soldering wire to terminal.(refer to Fig.2)
fig.30ac2
3.
When you remove the power supply cord from PS-1 BOARD, the dregs of a wire should not remain on a terminal.
12
PS-1 BOARD
WIRING COLOR
POWER SUPPLY
CORD
HOT
117V BLACK
230V BROWN
230VE BROWN
240V BROWN
COMMON
WHITE
BLUE
BLUE
BLUE