High-Voltage Power Supply Board(P2H) 3 - Oki OKIPAGE 8iM Maintenance Manual

3.3.6 High-Voltage Power Supply Board (P2H)
(1) Dismount upper cover assy. (See Section 3.3.5.)
(2) Remove three screws 1 and remove the cover 2 and draw out high-voltage power supply
board(P2H) 3.
(3) Disconnect all the cables 4 from high-voltage power supply board(P2H) 3 and dismount

high-voltage power supply board(P2H) 3.

Caution: Note the following when assembling the high-voltage power supply board(P2H):
2
1
41260201TH Draft
• Mount the high-voltage power supply board(P2H) with top cover assy removed
or open.
• Take care that cable 4 will not interfere with the paper sensor exit when it is
connected.
• Replacement parts of High-Voltage Power Supply Board (P6L) is see 3.3 18)
Paper sensor exit
4
3
1
4
44 /106