Onnection - Kenwood DNX7180 Quick Start Manual

Return to the Top page
Bluetooth Operation
Registering the Bluetooth Unit
1
Touch [SET] of [Regist New Device].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
Connecting the Bluetooth
registration. See
unit (P.57).
• If a Bluetooth unit cannot be registered by normal
register (pairing) operation, touch [SP DEV]. For
Registering special Bluetooth unit
details, see
(P.57).
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
56 56
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears
again.
4
Select the Bluetooth unit to register
from the list.
The Connection Device List screen
appears.
NOTE
• Registering operation can be performed from the
Bluetooth unit. In this operation, entering the PIN
Registering Bluetooth
code is necessary. See
unit PIN code (P.63).
• If registering cannot be completed even when
the PIN code is correct, try
Bluetooth unit (P.57).
Registering special