Equalizer Control - Kenwood DNX7180 Quick Start Manual

2
Set each item as follows.
Fader #/Balance #
Adjust the volume balance around the
touched area.
[2] and [3] adjust the right and left volume
balance.
[5] and [∞] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to "None".
Speaker setup (P.81).
See
Bass Boost
Sets the amount of bass boost among "OFF"/
"Step1"/ "Step2".
Loudness
Turns the loudness control function on or
off. If turned on, high and low tones are
automatically enhanced during low volume.
Settable only when zone function
to off.
* I f you have increased the volume first, then
reduced the volume using the "Volume
Offset", the sound generated if you
suddenly switch to another source may be
extremely loud.

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
If you use
equalizer manually.
1
Controlling EQ curves
1
(P.87)
is set
NOTE
• [iPod] is available only during iPod source.
Return to the Top page
, you can also adjust
Touch [Equalizer].
Equalizer screen appears.
operation
Select EQ curve from [Natural],
[Rock], [Pops], [Easy], [Top40], [Jazz],
[Game], [iPod], and [User].
Audio Setting Up
85