Controlling General Audio - Kenwood DNX7180 Quick Start Manual

Return to the Top page
Audio Setting Up
Car type adjust
You can manually set the sound output
timing of each channel.
1
In the Car Type screen, touch [Adjust].
Car Type Adjust screen appears.
2
Touch the speaker you wish to adjust
and set a delay time using [2] and [3]
or slider bar.
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
• The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
5feet
84 84
+3.4feet
1.6feet
2.5feet
+2.5feet
+0feet
DSP select
You can select whether using DSP (Digital
Signal Processor) System.
1
Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
There is no effect by DSP.
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.

Controlling General Audio

1
Touch [Audio Control].