Paper Size Error - Oki OKIPAGE 4w Maintenance Manual

3

Paper size error

• Is the paper of the specified size being use?
• No
• Yes Is paper sensor E (paper) operating normally?
• No
• Yes Is the paper sensor (exit) operating normally?
• No
• Yes Replace the high-voltage power supply board.
Use paper of the specified size.
Replace paper sensor E (paper) or clean the inlet sensor on the high-voltage
power supply board.
Replace the paper sensor (exit) or clean the outlet sensor on the high-voltage
power supply board.
Paper sensor (exit)
Paper sensor E (paper)
Toner
sensor
Assy
Paper sensor E (manual feed)
Exit roller
Heat roller
Transfer roller
Feed roller
Hopping
roller
6 - 11