Detail Of Each Function; Engine Menu Setting; Engine Counter - Oki OKIPAGE 4w Maintenance Manual

4.

DETAIL OF EACH FUNCTION

4.1

Engine Menu Setting

Engine Menu Setting is used to set, display, and change the following menu items: (See Figure
C-1.)
(1) Print Position
Used to adjust the print start position.
(2) LED Head Marking No.
Used to adjust the exposure time of the LED head.
(3) LED Head Width
Used to specify the LED head dot count.
(4) LED Head Wire
Used to specify whether the data wire of the LED head is one-wire (non-adjustment) type or
two-wire (adjustment) type. (This printer, however, can use only one-wire type.)
(5) Setting or Humidity
Used to adjust transfer current.
(6) Entry
Used to reflect the engine menu setting values on the printer.
(7) Cancel
Used to clear unreflected items. (Items for which Entry is not specified.)
4.2

Engine Counter

Engine Counter is used to display and initialize the following count values: (See Figure C-1.)
(1) Drum Count
Number of revolutions of mounted EP drum
(2) Total Drum Count
Total number of revolutions of EP drum after shipment
(3) Page Count
Total number of printed pages after shipment clicking the "Reset" button cleans each counter.
(4) Reset All
Used to clear all counters.
C - 2