JVC DX-T9 Service Manual page 50

3.6 Subwoofer section (For DX-T9, DX-T7)
3.6.1 Removing the front panel assembly
(See Fig.1)
Insert the tip of a flat-bladed screwdriver or similar tool into the
space between the subwoofer main body and front panel assem-
bly, and lift the front panel assembly little by little to remove the
sections a.
Note:
To prevent damaging the front panel assembly and subwoofer
main body, insert cushioning plates etc. into the space be-
tween the subwoofer main body and front panel assembly.
3.6.2 Removing the woofer
(See Fig.2)
• Remove the front panel assembly.
(1) From the front side of the subwoofer main body, remove
the six screws A attaching the woofer.
(2) Take out the woofer from the subwoofer main body and
disconnect the wires from the terminal on the back side of
the woofer.
1-50 (No.MB368)
Front panel assembly
a
a
a
Fig.1
Woofer
A
Terminal
Wires
Fig.2
a
a
a
A