JVC DX-T9 Service Manual page 42

3.3.6 Reattaching the Play head
(See Fig.11 to 13)
(1) Reattaching the head mount assembly.
a) Change front of the direction cover of the head mount
assembly to the left (Turn the head forward).
b) Fit the bosses O', P', Q', U' and V' on the head mount
assembly to the holes P and V, the slots O, U and Q of
the mechanism sub assembly (See Fig.11 to 13).
(2) Tighten the azimuth screw for reversing.
(3) Reattach the spring from the back of the Play head.
(4) Connect the flexible wire to connector
amplifier board.
1-42 (No.MB368)
CN48 on the head
O'
U'
Head mount assembly
Fig.11
Head mount assembly
O
P Q
V
U
Fig.12
Head Azimuth screw for reversing
Spring
CN48
Flexible wire
Head amplifier board
Fig.13
P' P'
V' V'
Direction cove r
Q'
Direction
cover
Head mount