Wpa/Wpa2-Psk - D-Link DIR-600L User Manual

Section 3 - Configuration
It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Wireless Setup on the left side.
2. Next to Security Mode, select Enable WPA/WPA2 Wireless Security
(enhanced).
3. Next to Cipher Mode, select TKIP, AES, or Both.
4. Next to PSK/EAP, select PSK.
5. Next to Network Key, enter a key (passphrase). The key is an
alpha-numeric password between 8 and 63 characters long. The
password can include symbols (!?*&_) and spaces. Make sure you
enter this key exactly the same on all other wireless clients.
6. Click Save Settings to save your settings. If you are configuring
the Router with a wireless adapter, you will lose connectivity until
you enable WPA/WPA2-PSK on your adapter and enter the same
passphrase as you did on the Router.
D-Link DIR-600L User Manual

WPA/WPA2-PSK

25