Save And Restore - D-Link DIR-600L User Manual

Section 3 - Configuration
This window allows you to save your configuration file to a hard drive, load configuration settings from a hard drive, and restore
the Router's factory default settings.
Save Settings to Use this option to save the current router configuration
Local Hard Drive:
settings to a file on the hard disk of the computer you are
using. First, click the Save button. You will then see a file
dialog, where you can select a location and file name for
the settings.
Load Settings Use this option to load previously saved router configuration
from Local Hard settings. First, use the Browse control to find a previously
save file of configuration settings. Then, click the Upload.
Drive:
Settings button to transfer those settings to the Router.
Restore to This option will restore all configuration settings back to
Factory Default the settings that were in effect at the time the router was
Settings: shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
If you want to save the current router configuration settings,
use the Save button above.
Clear Language Click to remove all non-default language packs from the
Pack: router.
D-Link DIR-600L User Manual

Save and Restore

42