Table of Contents
Advertisement
Setting the Time, Date and Alarm
The
menu lets you set the time and date. It also lets you activate
CLOCK
the alarm function.
The Clock
The time is shown continuously at the bottom of the display when the
phone is in standby mode.
The hours and minutes can be presented in either the 24-hour format or
the 12-hour (a.m./p.m.) format.
How to Change the Time Format
Select Clock mode from the
Select the required clock mode and press YES.
How to Set the Clock
Select Set clock from the
CLOCK
The right and left arrows can be used to change the hours.
Enter the time in hours and minutes. Press YES.
If you have selected the 12-hour format in the Clock mode function
you can alternate between a.m. and p.m. by pressing * or #.
How to Automatically Update the Time
Provided your DECT system has a Real Time Clock, you can have the
clock in your phone automatically updated when you are logged on to
the DECT network. To do this:
Select Set clock from the CLOCK menu.
Select Aut.update.
Select Auto and press YES.
If this function is activated and your DECT system does not have a Real
Time Clock, nothing will happen. You will then have to set the clock
manually, following the instructions above.
22
menu.
CLOCK
menu.
The Date
It is possible to display the current date in the middle of the display
when the phone is in standby mode.
How to Set the Date Format
Select Date mode from the
CLOCK
Scroll to the required date format by using the right and left arrows.
Press YES to select a date format.
How to Set the Date
Select Set date from the
CLOCK
Enter the year (two digits) and press YES.
Enter the month and the day in the same way. Press YES.
The Alarm
The phone has an alarm function. When it is activated, an icon in the
B
shape of a bell (
) is shown in front of the current time in the display.
The alarm will sound at the set time even if the phone is turned off. The
illumination of the keys and the display will flash. The strength of the
alarm signal depends on the setting of the ring signal.
The alarm will sound for 60 seconds and will be repeated every nine
minutes if you do not turn it off. The alarm will automatically turn itself
of after approximately one hour.
How to Set the Alarm
Select Set alarm from the
CLOCK
Scroll to the New time option by using the right and left arrows.
Press YES.
Enter the time in hours and minutes. Press YES.
Note! If you have chosen the 12-hour format in the Clock mode function
you can alternate between a.m. and p.m. by pressing * and #.
menu.
menu.
menu.
EN/LZT 126 1452 R2A
Advertisement
Table of Contents
