Preparing Your Phone For Dect Networks; Pbx Prefix; External Line Prefix; Area Code - Ericsson TH688 User Manual

Preparing Your Phone for DECT Networks

In order to benefit in the best way possible from the dual mode
functions, make sure the following items have been programmed into
your phone. This is usually done by a network administrator. If
necessary, you can program it yourself.
Programming the sequences below will make your telephone distinguish
internal calls from external ones automatically when you are making
calls.
In some cases, when a phone number could be external or internal, the
phone will ask you to confirm whether the number you wish to dial is
external or internal.

PBX Prefix

Note! The section below only applies if you are connected to a company
DECT network, not to a Home Base Station.
The PBX prefix is the first few digits, common to all phone numbers in
a company switchboard, for example. You have to enter this prefix in
order for your phone to recognise internal numbers stored in your phone
book, thus dialling internally instead of externally.
Select Own line from the
SETTINGS
Scroll to DECT line, using the arrow keys, and press YES.
Scroll to your DECT network and press YES.
Scroll to PBX prefix and press YES.
Enter your company's PBX prefix and press YES. Please note that
you can enter several PBX prefixes.

External Line Prefix

Note! The section below only applies if you are connected to a company
DECT network, not to a Home Base Station.
The external line prefix is the number you have to dial in order to get an
external line (for example 0)
Select Own line from the
SETTINGS
Scroll to DECT line, using the arrow keys, and press YES.
6
menu.
menu.
Scroll to your DECT network and press YES.
Scroll to Ext. line and press YES.
Enter the external line prefix and press YES.

Area Code

Note! The section below applies to both DECT networks and Home
Base Stations.
Select Own line from the
SETTINGS
Scroll to DECT line, using the arrow keys and press YES.
Scroll to your DECT network or home base station and press YES.
Scroll to Area code and press YES.
Enter the area code and press YES.

Country Code

Note! The section below applies to both DECT networks and Home
Base Stations.
Select Own line from the
SETTINGS
Scroll to DECT line, using the arrow keys. Press YES.
Scroll to your DECT network or home base station and press YES.
Scroll to Count. Code and press YES.
Enter the country code (for example 46). Press YES.

International Access Code

Note! The section below applies to both DECT networks and Home
Base Stations.
Select Own line from the
SETTINGS
Scroll to DECT line, using the arrow keys and press YES.
Scroll to your DECT network or home base station and press YES.
Scroll to Int. code and press YES.
Enter the international access code (for example 009) and press YES.
menu.
menu.
menu.

EN/LZT 126 1452 R2A