How To Recall A Phone Number; How To Edit The Phone Book; En/Lzt 126 1452 R2A - Ericsson TH688 User Manual

Overwrite Protection
This message appears if you try to store a phone number in a position
which already contains a phone number.
You can then do one of the following:
Store the number in a different position . Press NO and then the new
number of the position.
Store the number in the selected position, thus erasing the old
number. Press YES.
When the Card Memory is Full
If the card memory is full and you wish to store another number, you
have to enter the number of an already occupied position, thus erasing
the old number.

How to Recall a Phone Number

Using the Name – Alt. 1
Clear the display by pressing CLR.
Press the left arrow followed by YES to select the
menu.
Press YES to select the Name recall function.
Enter one or more letters of the name in the correct order and press
YES.
If the displayed name is not the required one, scroll through the
phone book with the right and left arrows until you find the
correct name.
Press YES to call the name or NO to return to standby.
Using the Name – Alt. 2
Clear the display by pressing CLR.
Press the left arrow followed by a numeric key. For example, to recall
a name beginning with 'A', press 2. To recall a name beginning with
'E', press 3 twice.
If the name displayed is not the required one, scroll with the
right and left arrows until you find the correct name.
Press YES to call the name or NO to return to standby.
14
Using the Position
Clear the display by pressing CLR.
Press the left arrow followed by YES to select the
menu.
Press the right arrow and then YES to select the Position recall
function.
Press
How to Make a Call Using the Phone Book (DECT mode)
Please refer to the chapter 'Making and Receiving Calls in DECT mode',
p. 8, for more information.

How to Edit the Phone Book

PHONE BOOK
Note! You cannot edit the flash memory.
Select Edit from the
Enter the position number and press YES.
If you wish to enter the name, press the right arrow. Enter the full name
and press YES.
You can now change the position number (in the top line), the name (in
the middle line) or the phone number (in the bottom line).
When the cursor is positioned to the right of the characters in a line, you
can move the cursor to the next line by pressing the right arrow and then
make the changes in that line.
Press CLR (repeatedly) to erase the last character(s) in a line. Then enter
the new characters.
You can also move the cursor back with the left arrow and erase
characters to the left of the cursor, or insert characters in the cursor's
position.
When you are finished with the changes, press YES.
To enter a number in the flash memory, for example ¤1, press
#
to enter the ¤ character.
If you entered the wrong position number, scroll through the
card or flash memory using the right and left arrows until you
find the phone number.
to call the number or to return to standby.
YES NO
menu.
PHONE BOOK
PHONE BOOK

EN/LZT 126 1452 R2A