Advertisement
AL-1250
4. GDI Printer Specification (Standard for AL-1250, Option for AL-1020/1220)
Printer speed
First Print time
CPU
Memory
Interface
Emulation
Interface Font
Resolution
Operation System Compatibility
Minimum System Requirements
5. Other
AL-1020
AL-1220
AL-1250
*) The above models allow to use the SOPM function from the SPF.
A. SOPM function
(1) The SOPM function is effective either in the OC copy mode or in the SPF copy mode.
(2) The SOPM in the SPF copy mode: Even when a document is set on the document table and the SPF mode lamp is lighted, the
quantity display remains unchanged (does not turn to "1"). Under that condition, press the quantity set key to set the quantity.
(3) Basic operation: The first document is read and data are stored in the memory and copies of the set quantity are made.
If there is the second document, it is read and the data are stored in the memory and copies of the set quantity are made similarly.
This procedure is repeated until the end of the documents.
B. 2nd cassette door
(1) The sensor output when the 2nd cassette door is open is the same as that when PPD3 is ON. Therefore, when the initial operation
is made (the power is turned on and the side door is opened/closed) with the 2nd door open, the JAM lamp will light up.
6. AL-1200 specifications
The AL-1200 is the 12 sheets/min model of the AL-1010.
The Specifications are the same as those of the AL-1010, except for the copy speed and the average power consumption during copy-
ing (270Wh/H (*1)).
Please refer to the Service Manual of the AL-1010.
(*1) Depends on the operating conditions and the input voltage.
WPPM (TBD) (A4/8-1/2
9.6 sec (A4/8-1/2
11, Not include communication time to the host PC and the set up
time of polygon mirror)
None
4 MB • 6 MB
IEEE1284
Sleek type GDI
None
600 dpi
Win 3.1, WFW 3.11, Win 95, Win 98, Win NT 4.0
Win 3.1: 486 or better processor, 8 MB Ram (16 recommended)
30 MB of additional HD Space (+5 MB for Win 32s installation)
Win 95: 486 or better processor, 8 MB Ram (16 recommended)
30 MB of additional HD Space.
Win 98: 486 DX or better processor, 16 MB Ram (32 recommended)
30 MB of additional HD Space.
NT 4.0: 486 or better processor, 8 MB Ram (16 recommended)
30 MB of additional HD Space.
10cpm/MB/SOPM/SPF
12cpm/MB/SOPM/SPF
12cpm/MB/SOPM/SPF/GDI/2nd
11, Sharp original)
2-3
Advertisement
