Advertisement
AL-1250
3. UNPACKING
Be sure to hold the handles on both sides of the copier to un-
pack the copier and carry it to the installation location.
4. REMOVING PROTECTIVE PACKING
MATERIALS
1) Remove pieces of tape and protective cover. Then open the
original cover and remove protective materials (a) and (b).
AL-1020/AL-1220
AL-1250
2) Use a coin (or suitable object) to remove the screw.
Store the screw in the paper tray because it will be used if
the copier has to be moved.
5. INSTALLING THE TD CARTRIDGE
1) Open the bypass tray and then open the side cover while
pressing the side cover open button.
2) Remove the CAUTION tape from the front cover and
remove the two protective pins from the fusing unit by pull-
ing the strings upward one at a time.
CAUTION tape
3) Push gently on both sides of the front cover to open the
cover.
4) Remove the TD cartridge from the bag. Remove the protec-
tive paper. Hold the cartridge on both sides and shake it
horizontally four or five times.
5) Hold the tab of the protective cover and pull the tab to your
side to remove the cover.
6) Gently insert the TD cartridge until it locks in place.
4-2
Protective pins
4 or 5 times
Advertisement
