Table of Contents
Advertisement
AF-M
Default value is 300.
A2T
TV A2 Threshold
Default value is 250.
To adjust AF-M:
1. Enter SDAM:
Press the following key sequence on the remote control transmitter:
0-6-2-5-9-6-MENU Do not allow the display to time out between entries while keying
the sequence.
2. Use the MENU UP/DOWN keys to highlight the AUDIO sub menu.
3. Press the MENU LEFT/RIGHT keys to enter the AUDIO sub menu.
4. Use the MENU UP/DOWN keys to select AF-M.
5. Use the MENU LEFT/RIGHT keys to adjust the value of AF-M to 300.
6. Press the MENU button to return to the top level SDAM menu.
7. To ensure the AF-M setting is saved: Turn the television set OFF by using the
POWER button on the remote control transmitter or the local keyboard. Disconnect the
television set from AC power for at least ten seconds. Reconnect the television set to
AC power. Turn the television set ON by using the POWER button on the remote
control transmitter or the local keyboard.
To adjust A2T:
1. Enter SDAM:
Press the following key sequence on the remote control transmitter:
0-6-2-5-9-6-MENU Do not allow the display to time out between entries while keying
the sequence.
2. Use the MENU UP/DOWN keys to highlight the AUDIO sub menu.
3. Press the MENU LEFT/RIGHT keys to enter the AUDIO sub menu.
4. Use the MENU UP/DOWN keys to select A2T.
5. Use the MENU LEFT/RIGHT keys to adjust the value of A2T to 250.
6. Press the MENU button to return to the top level SDAM menu.
7. To ensure the A2T setting is saved: Turn the television set OFF by using the POWER
button on the remote control transmitter or the local keyboard. Disconnect the
television set from AC power for at least ten seconds. Reconnect the television set to
AC power. Turn the television set ON by using the POWER button on the remote
control transmitter or the local keyboard.
Hide quick links:
Advertisement
Table of Contents
