Philips 7629 Service Manual page 55

4. Use the MENU UP/DOWN keys to select SL.
5. Use the MENU LEFT/RIGHT keys to toggle SL "Off" and "On"
6. Press the MENU button to return to the top level SDAM menu.
7. To ensure the SL setting is saved: Turn the television set OFF by using the POWER
button on the remote control transmitter or the local keyboard. Disconnect the
television set from AC power for at least ten seconds. Reconnect the television set to
AC power. Turn the television set ON by using the POWER button on the remote
control transmitter or the local keyboard.
White Tone
Figure: White Tone Menu
The values of the black cut off level can be adjusted in the WHITE TONE sub menu.
Normally, no alignment is needed for WHITETONE, and the given default values are used.
Default settings:
NORMAL (color temperature = 9600 K):
NORMAL RED = 40
NORMAL GREEN = 40
NORMAL BLUE = 40
To adjust NORMAL RED, NORMAL GREEN, and NORMAL BLUE:
1. Enter SDAM:
Press the following key sequence on the remote control transmitter:
0-6-2-5-9-6-MENU Do not allow the display to time out between entries while keying
the sequence.