Copying A Day - Honeywell T7200D Product Data

T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
Setting Program Times
1. Press Occupied Start Time.
NOTE: Anytime a start time is not required, press
Clear Start Time.
Occupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
2. Press Day until the desired day is displayed.
Day
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
3. Press increase
or decrease
time is displayed.
NOTE: The program times are in fifteen minute
intervals. (Example: 8:00, 8:15, 8:30).
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
4. Press Occupied Start Time a second time to set a
second Occupied Start Time.
Occupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
5. Press increase or decrease
time is displayed.
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
6. Press Unoccupied Start Time.
Unoccupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
7. Press increase
or decrease
time is displayed.
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
8. Press Unoccupied Start Time a second time to set a
second Unoccupied Start Time.
Unoccupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
Set Program
Start Time
AM
Change
Time/Temp
Temp Mon
Occupied 1
Heat/Cool
Settings
Fan
M4955A
Set Day/Time
PM
Change
Time/Temp
Tue
M4952B
until the desired start
Set ProgramStart Time
AM
Change
Time/Temp
Wed
Occupied 1
M4957A
Set ProgramStart Time
Change
Time/Temp
Unoccupied
Temp
Wed
Heat/Cool Occupied 2
Settings
Fan
M4958B
until the desired start
Set ProgramStart Time
PM
Change
Time/Temp
Wed
Occupied 2
M4959A
Set Program Start Time
PM
Change
Time/Temp
Unoccupied
Temp
Wed
Heat/Cool Un Occupied 1
Settings
Fan
M4960A
until the desired start
Set ProgramStart Time
PM
Change
Time/Temp
Wed
Un Occupied 1
M4961A
Set Program Start Time
Change
Time/Temp
Unoccupied
Temp
Wed
Heat/Cool Un Occupied 2
Settings
Fan
M4962B
9. Press increase
time is displayed.
Set Program
Run Occupied Unoccupied
Program Start Time Start Time
Temporary Set Current Clear
Occupied Day/Time Start Time
Continous
Unoccupied

Copying a Day

NOTE: The thermostat must be in program mode to use
the copy feature. If the thermostat is already in the
program mode, go to step 2.
1. Press Occupied Start Time.
Occupied
Start Time
Run Occupied
Program Start Time
Temporary Set Current
Occupied Day/Time
Continous
Unoccupied
2. Press Day to select the day to be copied if different from
the day displayed.
Day
Set Program
Run Occupied Unoccupied
Program Start Time Start Time
Temporary Set Current Clear
Occupied Day/Time Start Time
Continous
Unoccupied
3. Press Copy.
Copy
Set Program
Run Occupied Unoccupied
Program Start Time
Temporary Set Current
Occupied Day/Time
Continous
Unoccupied
4. Press Day until the day to be copied to is displayed.
Day
Set Program
Run Occupied Unoccupied
Program Start Time Start Time
Temporary Set Current Clear
Occupied Day/Time Start Time
Continous
Unoccupied
5. Press Copy.
NOTE: donE will be displayed for two seconds and
then the program display is shown.
Copy
Set Program
Run Occupied Unoccupied
Program Start Time Start Time
Temporary Set Current
Occupied Day/Time Start Time
Continous
Unoccupied
6. Repeat steps 3 through 5 for all the days desired.
7. Press Run Program.
Run
Program
Run Occupied
Program Start Time
Temporary Set Current
Occupied Day/Time
Continous
Unoccupied
17
or decrease until the desired start
Set ProgramStart Time
PM
Set Temperature Change
Time/Temp
Occupied Unoccupied
Day Temp Temp
Wed
Un Occupied 2
Heat/Cool
Copy Settings
System Fan
Set Program Start Time
AM
Set Program Set Temperature Change
Time/Temp
Unoccupied Occupied Unoccupied
Start Time Day Temp Temp Mon
Occupied 1
Clear Heat/Cool
Start Time Copy Settings
System Fan
Set Program Start Time
AM
Set Temperature Change
Time/Temp
Occupied Unoccupied
Day Temp Temp Wed
Occupied 1
Heat/Cool
Copy Settings
System Fan
Set Temperature Change
Time/Temp
Occupied Unoccupied
Start Time Day Temp Temp
Wed
Clear Heat/Cool
Start Time Copy Settings
System Fan
Set Temperature Change
Time/Temp
Occupied Unoccupied
Day Temp Temp Wed Thu
Heat/Cool
Copy Settings
System Fan
Set Temperature Change
Time/Temp
Occupied Unoccupied
Day Temp Temp
Clear Heat/Cool
Copy Settings
System Fan
AM
Set Program Set Temperature Change
Time/Temp
Unoccupied Occupied Unoccupied
Start Time Day Temp Temp
Mon
Clear Heat/Cool Occupied 1
Start Time Copy Settings
System
System Fan
Heat
M4963A
M4955A
M4966A
M4967A
M4968A
M4969A
Room
Fan
Auto
M4954A
63-4355—4