Copying A Day - Honeywell Series 2000 Manual

Press increase
desired start time is displayed.
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
Press Unoccupied Start Time a second time to
set a second Unoccupied Start Time.
Unoccupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
or decrease key until the
Set ProgramStart Time
PM
Change
Time/Temp
Unoccupied
Temp
Wed
Heat/Cool
Un Occupied 1
Settings
Fan
Set Program Start Time
Change
Time/Temp
Unoccupied
Temp
Wed
Heat/Cool Un Occupied 2
Settings
Fan
Press increase
desired start time is displayed.
M4961A

Copying a Day

NOTE: The thermostat must be in the program
mode to use the copy feature. Go to step 2
if the thermostat is already in the program
mode.
M4962B
Press Occupied Start Time.
Occupied
Start Time
9
or decrease
Set ProgramStart Time
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Wed
Un Occupied 2
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
Set Program
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Tue
Occupied 1
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
key until the
PM
M4963A
Start Time
AM
M10255
63-4356—1