Cisco TelePresence 7010 Help Manual page 67

Conferences
Conference status reference
Table 35: Status
Field Field description
Status The status of the conference:
Scheduled
n
Enabled
n
Active
n
Inactive
n
Completed
n
This field may also display warnings about
the conference's configuration.
Numeric ID The numeric ID assigned to this conference
and an indication if it is PIN protected.
Cisco TelePresence Server 7010 and MSE 8710 in Locally Managed Mode Printed Help (4.0)
Usage tips
Conferences can be:
Active (<X> endpoints) - due to end <time>:
n
this conference is in progress and has a
scheduled end time.
Active - permanent: this is a permanent
n
conference which has past its start time but
may or may not have any active participants.
Inactive: this conference is one that is
n
neither Scheduled nor Enabled. You can
only start the conference from its
Configuration pages.
Enabled: this conference is one that an
n
endpoint user can call into with a numeric
ID to start the conference. It must have a
numeric ID. Its status will change to Active
(<X> endpoints, <N> screens) while there
are active participants (or Active (<X>
endpoints) if all endpoints are audio-only).
Completed: this conference had a
n
scheduled end time which has passed.
The status may have additional information
about the conference duration, and whether it
is locked and for how long. For example,
Inactive - Due to end in 5 hours and 27
minutes [Locked - will be unlocked in 2 hours
and 7 minutes].
Conference configuration warnings examples
that may display are: [Duplicate numeric ID -
not registered], [No participants allowed - all
port limits 0, [Requires encryption, but
encryption not supported], and so on.
Status or
Page 67 of 132