5. DIRECTION FOR INSTALLATION AND USE
DIRECTION FOR INSTALLATION AND USE
TO INSTALL THE WASHING MACHINE
SELECTION OF THE INSTALLING PLACE
Install the washer on a horizontal solid floor.
If the washer is installed on an unsuitable floor, it could
make considerable noise and vibration.
INSTALLATION OF THE UNDER BASE COVER
!
The packing box opened, there is a under-base
cover at the bottom of the back.
HOW TO INSTALL ON AN INCLINED PLACE
!
Height Setting
• After controlling the height by
turning the adjustable legs, let the
washer put down to the ground.
13
Never install in these places
• The place where it would be exposed to direct
• The place nearby a heater or heat appliance.
• The place where it would be supposed to be frozen
• The kitchen with coal gas and a damp place like a
• The proper installation of the washing machine can
increase the wash effectiveness and the life of it.
After installing the washing machine, close the under-base cover.
@
If the washer is installed on an unsuitable floor, it could make considerable
noise and vibration, and could cause a malfunction.
Use the height adjust rubber to adjust the washing machine so that it sits
properly.
@
Check the Horizontal Status
• Check the position of tub above
the center of the washer.
sunlight.
in winter.
bathroom.
Push the under-base cover into the end, which
decreases the noise made by this washer.
NOTES:
The opening must not be
obstructed by carpeting when
the washing machine is in-
stalled on a carpeted floor.