3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
TouchPad (see
f.
Display assembly (see
g.
Top cover (see
Remove the speaker assembly:
1.
Disconnect the speaker cable (1) from the system board.
2.
Remove the two Torx PM2.5×8.0 screws (2) that secure the speaker assembly to the base
enclosure.
3.
Remove the speaker assembly (3) from the base enclosure.
Reverse this procedure to install the speaker assembly.
82
Chapter 4 Removal and replacement procedures
Battery on page
45).
Hard drive on page
49)
Optical drive on page
Keyboard on page
56)
Switch cover on page
TouchPad on page
66)
Display assembly on page
Top cover on page
79)
52)
69)
73)