Top Cover - HP EliteBook 8530p Maintenance And Service Manual

Top cover

Description
For use with HP EliteBook 8530w computer models (includes fingerprint reader board and cable)
For use with HP EliteBook 8530p computer models (includes fingerprint reader board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. TouchPad (see
f. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the two rubber screw covers (1). The rubber screw covers are included in the Plastics Kit,
spare part number 495076-001.
Battery on page 45).
Hard drive on page 49)
Optical drive on page
Keyboard on page 56)
Switch cover on page
TouchPad on page 66)
Display assembly on page
52)
69)
73)
Component replacement procedures
Spare part number
502336-001 or
495069-001
502335-001 or
495068-001
79