10.
Remove the top cover (2).
11.
If it is necessary to replace the microphone, turn the top cover upside down with the front toward
you.
12.
Remove the microphone cable from the clips (1) built into the top cover.
13.
Remove the microphone receiver (2) from the clip (3) built into the top cover.
Reverse this procedure to install the top cover.
Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Spare part number
495072-001
Component replacement procedures
81