Samsung Digimax S500 Service Manual page 52

8)BURNING TEST & CCD DEFECT CELL
After changing the MAIN PCB and parts, check whether all of the camera functions work correctly.
After changing the MAIN PCB and CCD, do the BURNING TEST and adjust the DEFECT CELL of CCD.
< Codes of program >
BASIC PROGRAM
<1> PROCESS CODE ;
<2> 65535 ;
<3> PROCESS CODE ;
<4> 0 OR 1 ;
<5> 0 OR 1 ;
<6> CONDITION ;
<7> SPEC ;
<8> NOT
<9> NOT
<10> NOT
<11> NOT
<12> NOT
<13> NOT
<14> 0
<15> 0
< How to test >
a. Insert the camera function number to the <6> code.
The first position is for repeat time (10 means 10 repeat time), the rest of the positions are for camera function.
See the below list.
CODE
1 DELETE ALL
2 LCD ON
3 WIDE
4 TELE
5 NOT USE
6 FLASH ONSHOOTING
7 FLASH OFF SHOOTING
8 NORMAL SHOOTING
b. Insert the codes and save the program in the SD card.
c. Insert the SD card to the camera and turn on the camera. (Set the mode dial to a still image mode)
d. The programed camera function will work.
If the test is complete, the camera will be turned off.
<1>10;
<2>65535;
<3>10,0;
<4>0;
Specify the repeat times
<5>0;
<6>1,14,1,2,4,3,6,7,8,9,10,11,12,13,14,15;
<7>;
<8>;
Camera function number
<9>;
<10>;0; Change '0' into '1' for adjust the DEFECT CELL
<11>0,0,1,800,800,6,30000,0;Change the first and second code ingo '1' to adjust the DEFECT CELL
<12>65535,0;
<13>;
<14>65408;
<15>0;close lens
Function
53
BURNING TEST
CODE
9 MACRO SHOOTING
10 CONTINUOUS SHOOTING(2)
11 SELF TIMER (10 sec.)
12 PLAY MODE
13 SLIDE SHOW
14 MOVIE CLIP RECORD
15 MOVIE PLAY
Ⅳ. ADJUSTMENT
Function