Samsung Digimax S500 Service Manual page 50

6) FLASH ADJUSTMENT
After changing the MAIN PCB and SUB PCB, adjust the FLASH.
< Codes of program >
BASIC PROGRAM
<1> PROCESS CODE ;
<2> 65535 ;
<3> PROCESS CODE ;
<4> 0 OR 1 ;
<5> 0 OR 1 ;
<6> CONDITION ;
<7> SPEC ;
<8> NOT
<9> NOT
<10> NOT
<11> NOT
<12> NOT
<13> NOT
<14> 0
<15> 0
< How to adjust the item >
a. Arrange a 36% reflect chart in a darkroom.
b. Arrange a camera in a darkroom.
c. The distance between the reflect chart and the camera should be 80cm.
d. Insert the codes and save the program in the SD card.
e. Insert the SD card to the camera and turn on the camera.
f. After completing the adjustment, the camera will be turned off.
※ If the adjustment is incomplete, <Figure 6-2> will display with beep sound. In this case, re-try the adjustment
process.
STROBO TEST
TEST COUNT : 10
LUMINANCE : 627
FLASH ADJ IN WIDE
< Figure 6-1 >
<1>13;
<2>65535;
<3>13,1;
<4>1;
<5>1;
<6>1300,100,620,500,345,245,10;
<7>;
<8>;
<9>;
<10>;
<11>;
<12>;
<13>;
<14>65535;
<15>0;
51
FLASH ADJUSTMENT
STROBO TEST
TEST COUNT : 3
LUMINANCE : 3768
FAIL!!
FLASH ADJ IN WIDE
< Figure 6-2 >
Ⅳ. ADJUSTMENT