Samsung Digimax S500 Service Manual page 41

Hide thumbs Also See for Digimax S500:
Table of Contents

Advertisement

Ⅳ. ADJUSTMENT
4) Check list for Digital camera repair
To check the digital camera functions before/after repairing, refer to the check list.
No.
Checking item
Check the exterior of a camera.
1
2
Insert the adapter.
3
Check the battery cover.
Check the card condition after
4
inserting the card.
5
Insert the Video cable.
6
Turn on the camera.
7
Press the zoom W/T button.
8
Macro focus.
9
Normal focus.
- Check the scratch, stain, misprint.
- Check whether the screws are turned firmly.
- Check the corrosion of terminal, bad exterior.
- Do chemical and glue test to the printing/ painting parts.
- Check the connecting and contact condition.
- Insert the batteries with the correct polarity and check the contact
condition.
- Check whether the cover is opened easily after closing.
- The card can be inserted or removed easily and cover is closed
firmly.
- Do inserting and removing card(SD/MMC) test two times.
→ The card must be inserted firmly and has not to spring out.
- Insert the card/batteries and give a little impact on the camera.
The camera must recognize the card and "CARD LOCKED"
message has not to be displayed.
- When the cable is inserted, check whether the
images play back on the external monitor.
- Check whether the green LED is blinking, SAMSUNG LOGO is on
and the start-up sound sounds.
- Check the "L" and "FINE" icon on the LCD monitor.
- Check whether the AE function is correct at the low light and high
light condition.
- Check whether the "beep" sounds on the recording and movie clip
mode.
→ The "beep" can be sounded in the microphone part.
Check that in a quiet room.
- Press the zoom W/T button with the viewfinder.
→ Check dust and percentage of the frame seen, zoom rate.
- Press the zoom W/T button with the TFT-LCD monitor.
→ Check the zoom rate and whether the zoom bar moves smoothly.
- Check whether the Macro icon(Flower) is displayed on the LCD
monitor.
- Check the AF in the Macro focus with the TFT-LCD monitor.
- Check whether the subject captured from 2M has over or under
exposure and the fucus is clear.
42
Check point

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digimax s600

Table of Contents