Adjusting Volume; Lowering Volume Quickly; Setting The Time And Calendar; Radio - Alpine CDA-9886M Owner's Manual

I
I
RESET switch

Adjusting Volume

Turn the Rotary encoder until the desired sound is
obtained.

Lowering Volume Quickly

Activating the Audiu Mute functiun will instantly luwer the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
Selting the Time and Calendar
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the General
mode, and then press ~/ENT.
Bluetooth*' General
H H
HD Radio"! Bluetooth
H
*'
Displayed only when INT Mute is OFF and the mode is set to other
than Blue tooth Audio.
Onlv when XM Radio is connected.
*2
*3 Oni" when SIRIUS Radio is connected.
Only when HD Radio is connected.
*4
3
Turn the Rotary encoder to select Clock Adjust,
~IENT.
and then press
4
Turn the Rotary encoder to set year.
5 ~
lENT.
Press
6
Repeat steps 4 and 5 above to set month, day, hour
and minute.
7
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
~IESC
• Pressing returns to the previous SETUP mode.
• If'lO operation is pe,j'ormed for 60 seconds. SETUP is canceled.
• To synchroni:e the dock to another clock/watch or radio time
(I/ln;)l/IKement. press and hold
s'etting the "hour". Minutes will reset to 00. (rthe display shows over
"30" min/ltes when vou do this. the tillle will advance one hour.
8-EN
Display XM02/SIRIUS".!
H H
~
IENTIor at least 2 seconds (Ifter

Radio

Rotary encoder
~
SOURCE/<!> III
I
TUNE/A••E
B AND.
'. . I
~~:.--:...,.....--.\."
t ' .
~
frT~ :~,:~~±~
This unit cannot receive HD Radio signals (digital terrestrial radio).
order tu activate the digital radio functiuns described beluw. an optional
HD Radio Tuner module must be connected through the Ai-NET bus.

Listening to Radio

1
Press SOURCE/<!> to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
is displayed.
FM 1 ---t FM2 ---t AM ---t FM 1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) LOCAL (Local mode)
---t
MANUAL (Manual mode) ~
• The initial mode is Distance illUde.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 ~ ~
Press or to tune in the desired station.
~ ~
Holding down or
continuously.
• II Digital Seek is set to ON. the SEEK UP/DOWNIwlctiollS only stop
on digital station frequencies while receiving HD radio. ReIer
"Digital Seek ON/OFF Setting" (page 2 I ).
~/ENT
(1 through 6)
In
---t
DX
will change the frequency
to