Table of Contents
Advertisement
Section 5: Specifications & Capacities
Ground Speed
Steering Type
Twin Lever Steering Controls
Steering Turning Radius
Brake Service
Parking
Mower Drive
Safety Features
Seat
Mainframe Construction
Drive Motor Mount
Front Caster Wheels
Front Caster Forks
Deck Thickness
Box-Section Reinforced Front
Edge
Deck Trim Edges
Deck Housing Depth
Deck Lift
Hand Operated Controls
Indicators
Cup Holder
Cutting Heights
Mowing Blades
Blade Tip Speed
Blade Drive
Spindles
Flotation
40
Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor
Table of Contents
Z44 & Z52 Accu-Z Razor
Twin lever steering provides independent control of each drive wheel.
True zero degree. Turns with counter-rotating independent drive wheels
Single V-belt with electric clutch and spring tension idler pulley
Operator presence system connected to deck and drive clutches.
Molded-vinyl seat. Bolt loosening required for forward and reverse adjustments.
11 Gauge decks with reinforcements welded into spindle mount areas
Ignition switch, throttle lever, control levers, blade engagement switch,
Foot-operated deck height adjustment. Pin for setting height, transport position.
Height adjustment in 1/4" increments from 1 1/2" to 4 1/2"
.20" x 2 1/2" x 15.81"
V-belt drive to all three spindles. Spring tension idler pulleys.
Machine ductile housing, 1" diameter high carbon steel shafts
Free-floating mower using three blades with center blade to the front.
Mower is suspended at the four corners on spring-assisted chains.
Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.
®
(General Specifications)
Z44
Forward: 0-7 MPH
Reverse: 0-5 MPH
Speed, forward, reverse, brake, and turns.
Hydrostatic dynamic braking
Lever applied pawl and cog wheel
Optional armrests kit for standard molded-vinyl seat.
Optional deluxe cushion seat with arm rests.
1 1/2" square solid steel.
1/8" welded steel
Mounted with roller bearings on each wheel.
3/8" steel.
11 GA. x 3 1/2" x 1 1/2" Box
Solid 1" x 3/8" steel bars for reinforced impact area
4 1/8" deep, (room for high-capacity mowing)
Foot-operated deck height adjustment.
Pin for setting height and transport position.
choke lever and Left/Right Fuel Tank Valve.
Engine warning light and hour meter
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp.
Heavy-duty, heat-treated, high-lift steel blades
16,811 FPM
and greasable ball bearings.
Z52
.20 x 2 1/2" x 17.81"
18,937 FPM
®
357-044M
Land Pride
2/27/07
Advertisement
Table of Contents
