Lenovo ThinkCentre 6136 Hardware Maintenance Manual page 110

5. Remove the retainer bracket from the failing drive and install it on the new
Figure 27. Retainer bracket for optical drive
6. Slide the new optical drive into the drive bay until it snaps into position.
Figure 28. Replacing the optical drive
7. Connect the signal and power cables to the drive.
8. To reinstall the front bezel, align the plastic tabs on the bottom of the bezel
9. Go to "Completing the FRU replacement" on page 106.
104
Hardware Maintenance Manual
optical drive.
with the corresponding holes in the chassis, then pivot the bezel inward until it
snaps into position.