Lenovo ThinkCentre 6136 Hardware Maintenance Manual page 108

Figure 24. Installing the hard disk drive into the bracket
10. Reconnect the power cable to the optical drive.
11. Go to "Completing the FRU replacement" on page 106.
102
Hardware Maintenance Manual
7. To install the new hard disk drive into the plastic bracket, flex the bracket and
align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the holes in
the hard disk drive. Do not touch the circuit board 5 on the bottom of the
hard disk drive.
8. Connect the signal and power cables to the rear of the new hard disk drive.
9. Slide the new hard disk drive into the drive bay until it snaps into position.