Running The Setup Wizard - Belkin ADSL Modem User Manual

Connecting your Router
3.
Turn on your computers. After your computers boot up, the LAN status
LED on the front of the Router will be on for each port to which a
wired computer is connected. These lights show you the connection
and activity status. Now you are ready to configure the Router for
ADSL connection.

Running the Setup Wizard

1.
You can access the web-based management user interface of the
Router using the Internet browser on a computer connected to the
Router. Type "192.168.2.1" (do not type in anything else such as
"http://" or "www") in your browser's address bar. Then press the
"Enter" key.
Note: It is strongly recommended that you use a computer physically
connected to the Router with an RJ45 cable for initial setup. Using a
wirelessly connected computer for initial setup is not recommended.
2.
The following screen will appear in your browser to prompt you to login. The
Router shi ps with no password entered. In the login screen, leave the password
blank and click the "Submit" button to log in.
Note: It is strongly recommended that you change the password to your own,
for increased security.
Please read the following
section entitled "Manually
configuring your
Router", for details on
how to change your
password and to reference
other security features.
13 13
1
2
3
4
5
6
7
8
9
10