Installing Cyclops F/X; Starting Cyclops F/X - Proxima 4100 User Manual

INSTALLING CYCLOPS F/X

Follow these steps to install the Cyclops F/X software:
1 Insert the disk labeled Proxima Cyclops F/X into your computer's floppy
drive.
2 Do one of the following:
•
•
•
3 Follow the instructions that appear on your screen.

STARTING CYCLOPS F/X

Once you're finished with the installation, do one of the following:
• In Windows 3.x or Windows 95, double-click the Cyclops F/X icon to
start the program.
• For Macintosh users, the software will automatically load each time you
start your computer.
Windows users
The first time you start the software, Cyclops F/X displays a Projector Setup
Tutorial (Wizard). Follow the instructions that appear on your screen. When
you have finished configuring your system, restart Windows.
Chapter Four
4-2
In Windows 95, choose Start, Run, then type a:\setup.exe
(or the drive letter for your floppy drive).
In Windows 3.x, choose File, Run, then type a:\setup.exe
(or the drive letter for your floppy drive).
On a Macintosh, double-click the disk icon, then double-click the
Cyclops F/X Installer icon in the disk window. Drag the Cyclops F/X
icon onto the hard disk icon.