Table of Contents
Advertisement
To COMPUTER IN
Figure 2-9 VGA connections
1 Unplug the monitor cable from the computer.
2 Plug the end of the supplied VGA cable with the large round collar into
the COMPUTER 1 IN port on the projector. Plug the other end of the
VGA cable into the computer's Video Out (VGA) port.
3 Connect your audio source to the COMPUTER 1 AUDIO inputs on the
projector.
NOTE: If you are using a second computer video or audio source, plug their
outputs into the COMPUTER 2 IN and COMPUTER 2 AUDIO connectors.
4 If you want to use an external monitor, connect the monitor cable to the
MONITOR OUT port of the projector.
5 Turn the projector on and press the
NOTE: An external monitor is not required to use the DP4100/4200.
VGA Cable
key.
Setting Up the Desktop Projector™ 4100/4200 2-7
From
MONITOR OUT
Advertisement
Table of Contents
