Table of Contents
Advertisement
1-10. BALANCER (ETC-INVERTER MT) BOARD REMOVAL
1
Remove 7 screws from each Inverter Cover
2
Pull out the Balancer board from the Lamp Socket.
Balancer Board
SHIELD REMOVAL
KLV-52V410A/52W410A
LCD Panel
1
Cover
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
OCCUR!
REMOVE SCREWS
SECURING
SHIELD
END VIEW
SOCKET
2
1
!
.
CONNECTORS AND
BALANCER (ETC-INVERTER) BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
BACKLIGHT
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
KLV-52V410A/52W410A
REMOVE
PULL BOARDS TO
THE RIGHT
18
Advertisement
Table of Contents
