Sony KLV-52V410A Service Manual page 11

Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
Channel 5
DISPLAY
The Self Check list displays.
Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a "0".
NOTE: If the Self Check display text is not completely visible, press the Menu HOME button on the Remote Commander to refresh the display.
SELF CHECK
002 MAIN_POWER
003 DC_ALERT1
005 PANEL_ALERT
006 BACKLIGHT
013 BACKLIGHT_BALANCE
00001 00027 00009 00000
3. Press the Channel 1 button on the Remote Commander to go to Page 2 of the Self Check list.
SELF CHECK
007 TEMP
008 SP_PROT
011 TRIDENT_IC
012 HFR_ERROR
012 TCON_ERROR
00001 00027 00009 00000
4. Press the Channel 4 button on the Remote Commander to go back to Page 1 of the Self Check list.
5. To exit Self Check display, turn the power off.
Clearing the Self Check Diagnostic List
1. In Service Mode, press the Channel 8
KLV-52V410A/52W410A
2 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
POWER .
Volume -
This differs from accessing Service Adjustments.
Channel 0 .
LED OFF
3 sec.
PAGE 1
Í 1 indicates an error was detected
01
Í 0 indicates no error was detected
00
00
00
00
PAGE 2
00
00
00
00
00
KLV-52V410A/52W410A
11