200hz lcd tv signature series in full hd, premium series in full hd, true cinematic series, modern classic series, sleek & stylish series, home theatre systems, portable dvd players (2 pages)
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KLV-52V410A RM-YD023 BRAZIL KLV-52W410A RM-YD023 BRAZIL ORIGINAL MANUAL ISSUE DATE: 6/2008 REVISION DATE SUBJECT 62008 No revisions or updates are applicable at this time. LCD COLOR TELEVISION...
Page 2
Self Diagnosis Supported model SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KLV-52V410A RM-YD023 BRAZIL KLV-52W410A RM-YD023 BRAZIL KLV-52W410A RM-YD023 LCD COLOR TELEVISION 9-883-793-01...
“XMB” and “XrossMediaBar” are the trademarks of Sony Corporation and Sony Computer Entertainment Inc. “PLAYSTATION” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc. Adobe is a registered trademark or a trademark of Adobe Systems Incorporated in United States and/or other countries.
Page 5
KLV-52V410A/52W410A KLV-52V410A KLV-52W410A Speaker Output 10W+10W 65 X 150 mm Dimensions (W x H x D) with stand 1,262 x 871 x 347 mm without stand 1,262 x 829 x 119 mm wall-mount hole pattern 300 x 300 mm wall-mount screw size...
Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identifi...
KLV-52V410A/52W410A SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specifi...
Page 8
Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KLV-52V410A/52W410A...
KLV-52V410A/52W410A SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).
KLV-52V410A/52W410A Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
Page 11
KLV-52V410A/52W410A 2 times 5 times LED ON 0.3 sec. LED OFF LED OFF 0.3 sec. 3 sec. Viewing the Self Check Diagnostic List 1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other: POWER .
KLV-52V410A/52W410A 1-5. TABLE-TOP STAND AND UNDER COVER REMOVAL Remove 4 screws Remove 1 screw Table-Top Stand Assembly Under Cover 1-6. AC INLET REMOVAL Remove 2 screws Remove 1 screw AC Inlet AC Bracket Bottom Bracket KLV-52V410A/52W410A...
KLV-52V410A/52W410A 1-7. STRUCTURAL FRAMES AND BRACKETS REMOVAL Remove 1 screw from D5 Support and LCD Panel Remove 1 screw from D5 Support Frame Remove 1 screw from Main Bracket and Bezel Remove 3 screws from Main Bracket and Spine frame...
KLV-52V410A/52W410A 1-8. SPEAKERS, UNDER BAR, H3E BOARD, H4 BOARD, AND LIGHT GUIDE REMOVAL Slide out Speaker (L) unit from Bezel Slide out Speaker (R) unit from Bezel Remove 2 screws from Under Bar Disconnect 1 connector and Slide out H3E Board from Clear Panel...
KLV-52V410A/52W410A 1-9. LCD PANEL REMOVAL NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached to the TCON and which side is attached to the BU Board.
KLV-52V410A/52W410A 1-10. BALANCER (ETC-INVERTER MT) BOARD REMOVAL Remove 7 screws from each Inverter Cover Pull out the Balancer board from the Lamp Socket. LCD Panel Cover Balancer Board WARNING NEVER REMOVE THE SCREWS SECURING THE PLASTIC STRIP HOLDING THE LAMP SOCKETS...
KLV-52V410A/52W410A SECTION 2: SERVICE ADJUSTMENTS 2-1. VIEWING SERVICE ADJUSTMENT DATA TVLF CHECK SERVICE There are no adjustments necessary for these models. All data has COLOR ADJ 00100 been set for optimal viewing for our customers. The following sections R_DRV are for informational purposes only.
KLV-52V410A/52W410A 2-4. USING THE REMOTE COMMANDER TO VIEW SERVICE DATA POWER Use the buttons on the Remote Commander to access the service menu items and adjust the data values. 1. Access Service Mode. Press the following buttons on the Remote Commander within a...
KLV-52V410A/52W410A SECTION 3: DIAGRAMS 3-1. CIRCUIT BOARDS LOCATION SWITCH UNIT (CONTAINS H1) ILLUMINATION MODULE (KLV-52W410A ONLY) 3-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in μF unless otherwise noted. pF : μμF 50WV or All voltages are in V.
Page 22
KLV-52V410A/52W410A REFERENCE INFORMATION Terminal name of semiconductors in silk screen printed circuit ( RESISTOR CAPACITOR : RN METAL FILM : TA TANTALUM Circuit Device Printed symbol Terminal name : RC SOLID : PS STYROL Collector Transistor : FPRD NONFLAMMABLE CARBON...
KLV-52V410A/52W410A 3-3. BLOCK DIAGRAM Rear Inputs YOUT for Slicer FHD Panel with HFR Digital Video for ATSC ITU-R BT.656 LVDS x245 x245 CXD9937GB CXD9937GB CVBS for PAP ITU-R BT.1120 Video SW Video SW S + Video1 ( 18h ) CXA2241...
COVER, UNDER (LL) (SCREWS TO ATTACH TABLE-TOP STAND TO TV) 2-580-607-01 SCREW, +PSW M5X12 For product protection and safety reasons, Sony strongly recommends 2-580-645-01 SCREW, +KTP2 3X10 that you use the screws provided with the TV. CAUTION: These screws cannot be used to secure the TV to Wall Mount Brackets.
Page 61
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7713 1-114-332-11 CERAMIC CHIP 22μF 6.3V D5131 6-502-318-01...
Page 62
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FB5001 1-216-864-11 SHORT CHIP FL7200 1-234-939-21 FILTER, EMI REMOVAL (SMD)
Page 63
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q2007 6-551-690-01 TRANSISTOR RT3N11M-TP-1 ! IC7501 6-711-288-01 MIC2005-0.5YM6TR...
Page 71
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES JR6710 1-216-296-11 SHORT CHIP R6714 1-216-836-11 METAL CHIP...
Page 72
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only D4Z D5 with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C6960 1-112-737-11 CERAMIC 27pF 6.3KV ! R6804...
Page 73
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only D5 G5 with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES ! Q6907 6-551-971-01 TRANSISTOR FMA10N60E-F111 Q6951...
Page 74
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C6251 1-114-325-11 CERAMIC CHIP 0.1μF CN6153 1-778-853-21 PIN, CONNECTOR (PC BOARD)
Page 75
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES FERRITE BEAD L6151 1-406-657-11 INDUCTOR 4.7μH L6400 1-414-183-41 INDUCTOR 10μH...
Page 76
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R6101 1-218-859-11 METAL CHIP 3.3K 0.50% 1/10W R6309...
Page 77
KLV-52V410A/52W410A NOTE: The components identifi ed by shading mark are critical for safety. Replace only G5 H3E with part number specifi ed. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R6513 1-216-833-11 METAL CHIP 1/10W VARISTOR...
Page 78
2-580-608-01 SCREW, +PSW M5X16 (SCREWS TO ATTACH TABLE-TOP STAND TO TV) For product protection and safety reasons, Sony strongly recommends that you use the screws provided with the TV. CAUTION: These screws cannot be used to secure the TV to the Wall Mount Brackets.