Balancer (Mt Inverter) Board Removal (Kdl-26L5000 Only) - Sony KDL-26L5000 Service Manual

1-8. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-26L5000 ONLY)

1 Remove 6 screws from Board cover
Pull out the Board from Lamp socket
2
KDL-26L5000/32L5000
2
Balancer Board
REMOVE SCREWS
SECURING SHIELD
LCD Panel
1
Cover
END VIEW
BACKLIGHT
SOCKET
INVERTER BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32" model but applies to all models.
KDL-26L5000/32L5000
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
18