u
INT 1
Internal name of the handset
If Eco Mode+ (
ner of the display.
Your phone is now ready for use!
Connecting the headset
Connecting the USB data cable
To connect the handset to a PC, you can connect a standard USB data cable with a
mini-B connector to the back of your handset (
¤
Remove the belt clip (if attached)
¢
(
page 11).
¤
Remove the battery cover (
¤
Connect the USB data cable to a
USB socket
Please note
Please connect your handset directly to
the PC; do not connect via a USB hub.
¢
page 38) is activated, the ¼ icon is displayed in the top left cor-
After removing the plastic cover, you can connect a head-
set to the left-hand side of your handset with the 2.5 mm
jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (
After using the headset, replace the plastic cover to enable
optimum sound in handsfree mode.
¢
page 10).
1
.
¢
page 47).
¢
page 57).
First steps
1
17