Table of Contents
Advertisement
Getting started
Data protection
If the product is connected to the Internet via an IP base station or router, it will automatically connect to
the Gigaset support server sending regular product specific information. This information will for example
be used for firmware updates or to provide internet services. For more information regarding the stored
data, please visit
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.
Date and time are set using the base. The date and time can also be set on an
IP-compatible base via a time server on the network.
If the base permits it, you can set the date and time manually using the handset.
¤
. . . use
The active cursor position flashes
. . . switch between cursor positions with
Enter date:
¤
. . . using
Enter time:
¤
. . . using
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the Back key
The telephone is now ready for use.
Connecting the headset
¤
Connect the headset with the RJ9 plug to
the socket labelled
or
¤
Connect headset via Bluetooth (
The headset volume corresponds to the
setting for the handset volume (
Accept a call on the headset
¤
Press the headset key
If two headsets are connected:
(Bluetooth or Corded)
.internetvoipphone.co.uk | sales@internetvoipphone.co.uk | 0333 014 4
12
gigaset.com
to select
Settings
. . . change cursor position with
enter the day, month and year in 8-digit format.
enter hours and minutes in 4-digit format.
.
1
p. 44).
select the required headset by pressing the display key
Availability and operation of the functions
may differ on your telephone.
OK
Date/Time
p. 38).
OK
Date/Time
Date:
15.08.2018
Time:
00:00
Back
1
Save
Advertisement
Table of Contents
