Changing The Display Language; Setting The Display - Gigaset S510h PRO User Manual

Setting up the handset
Changing the display
language
You can view the display texts in different
languages.
Ï
¢ ¢
v
Language
The current language is indicated by Ø.
s
Choose language and
§Select§
press
If you accidentally choose a language you do
not understand:
¢
v O5
s
Select the correct language and
press the right display key.

Setting the display

Setting the screensaver/slide show
When in idle state, a picture or a slide show
(all the pictures are displayed one after the
other) from the Screensaver folder of the
Resource Directory (
time can be displayed as a screensaver. This
will replace the idle state display.
The screensaver is not displayed in certain
situations, e.g., during a call or if the handset
is de-registered.
If a screensaver is activated, the
menu option is marked with μ.
Ï
¢ ¢
v
Display + Keypad
¢
Screensaver
The current setting is displayed.
¤
You can enter data in the following fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection:
Select screensaver or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and press
§OK§
.
46
.
¢
page 50) or the
Screensaver
§Save§
Press the display key.
Briefly press the end call key a to return to
the idle display.
Please note
If the analogue clock has been set as the
screensaver, the second hand is shown
only when the handset is in the base.
Setting Large Font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. Only one entry is shown
at a time on the display instead of several
entries and names are abbreviated if neces-
sary.
Ï
¢ ¢
v
Display + Keypad
¢
Large Font
§Change§
Press display key (³= on).
Setting the Colour Scheme
You can set the display to be shown in vari-
ous colour combinations.
Ï
¢ ¢
v
Display + Keypad
¢
Colour Schemes
Colour Scheme
Select
•
Setting the display Backlight
Depending on whether or not the handset is
in the charger, you can activate or deactivate
the Backlight. If it is activated, the display is
permanently dimmed. If the backlight is
deactivated it is switched on by pressing any
key. Digit keys appear on the display for pre-
dialling; all other keys do not have any fur-
ther functions.
Ï
¢ ¢
v
Display + Keypad
¢
Display Backlight
The current setting is displayed.
§OK§
(1 to 5) and press .