Camera Adjustment - Sony REVDN700-2 Instruction Manual

* There are 4 types of configuration area.
Editing Area(No Save), Default(Read Only). Save Area(Use on Start), Backup
* Don't Power off while doing Save, Load, Backup, Overwrite

CAMERA ADJUSTMENT

<White Balance>
1) ATW/Wide Mode: No limits in the range of color temperature.
2) ATW/Indoor Mode: Suitable for low color temperature.
- CRS(Color Rolling Suppression) Mode supported.
NOTE:
* When you select the CRS will be processed in the following order:
Checking Condition: Checking current environment within the range.
Checking Variation: Measure color rolling range during 30 seconds.
No Need CRS: Variation is low. No need to use CRS function.
Force CRS: Even if color variation is low, use CRS function.
- ATW Range: Adjust AWB Range.
- Convergence Shift: Adjust AWB target.
R Variation: Represent blue variation.
B Variation: Represent red variation.
3) ATW/Outdoor Mode: Suitable for high color temperature. (Natural Light)
4) Fix/Indoor Mode: Fixed color temperature (3200 ºK) mode, for indoor environment.
- R: Adjust red color.
- B: Adjust blue color.
- Push/Set: Tracking WB of current screen, and represent R, B value.
- Default: Restore R, B default value.
5) Fix/FL Mode: Fixed color temperature mode, for fluorescent lamp environment.
6) Fix/Outdoor Mode: Fixed color temperature (6300 ºK)mode, for outdoor environment.
<Auto Exposure>
NOTE:
* MIN_SHT (Minimum shutter speed) : NTSC:1/60se/ PAL:1/50sec
* MAX_SHT (Maximum shutter speed) : 1/100000sec
* FLC_SHT (Flickerless shutter speed) : NTSC:1/100sec PAL:1/120sec
1) AE Mode
- Full Auto: DC Lens or Video Lens – Fix shutter speed to MIN_SHT.
Manual Lens - Operating as shutter mode.
- Fast SHT (Fast shutter mode): Adjust range - 1/250~1/10000
- SHT Fix (Shutter Fix Mode): shutter speed is fixed at a given value.
NOTE:
* If lighting is not enough, noise may be increase.
* If lighting is enough using AGC maximum, automatically decrease shutter speed.
2) UDF (Ultra Deep Field)
Depending on lighting conditions and Motion state, automatically adjust AE and DNR.
Normally in low light environment, Sens-up feature may be missing the movement of
objects and High AGC value makes increase the noise. UDF function effectively to
User can stop this action.
10