Table of Contents
Advertisement
improve this phenomenon.
NOTE:
* Motion is none : Noise removal mode.
* Motion is occured: Fast screen update mode.
3) Low Light: If using UDF function, this function being disabled.
- AGC: Boost the signal and adjusting the brightness. (Off/Low/Mid/High)
- Sens-Up: By summing multiple fields, adjusting the proper brightness in low light
conditions (2X~ 256X)
- Apert : In low light conditions, reduce noise by lowing the sharpness value.
- Color: In low light conditions, reduce noise by lowing the color value.
4) WDR (Wide Dynamic Range) / WDR-Lite
WDR function can not be used with the BLC and is recommended Full Auto Modes.
- Visibility: Increases sharpness of the high brightness region.
- Comb Bal (Combination Balance) :Adjust the balance of High&low luminance area.
- Brightness: Adjust brightness level of WDR.
5) BLC: Back Light Compensation / BLC function can not be used with WDR function.
- EHLC (Excessive High Light Compensation) : Fill to high brightness area
with gray color. Clipping of the area is more bright area than the threshold value.
Clip Th (Clipping Threshold) : Adjust clipping level.
Clip Mask (Clip Mask Brightness) : Selecting gray color of clipping area.
- Auto: Weighting on the dark area of AE among the splitting 9 area.
- Spot: Weighting on the specified area of AE.
6) Brightness: Adjust AE reference level.
<Mask>
Privacy Zone can be configured with up to 10. Because they share area ID with
PVA Zone, It can not be used same ID.
1) Zone: Select mask number.
NOTE:
*If you see "PVA" in the "Func" menu PVA Function is currently being used in the area.
2) Func: Select mask on/off.
3) Color: Select mask color (15 colors available).
4) Transparency: Change the mask transparency.
5) Mosaic: Making mosaic current area.
6) Frame: Border display current area.
7) Shape: Select the shape of mask (4-point polygon or rectangle)
- Rect (Rectangle)
Adjust rectangle with 4-arrow keys. Press [ENTER] key is to finish edit area.
- Poly (4-Point Polygon/Each point can move)
It you select one of "a,b,c,d", the active point is displayed. Move the point with 4-
arrow keys. Press [ENTER] key is to finish edit area.
NOTE:
* For more than 180 of interior angle is not permitted.
- Posi: Adjust area position with 4-arrow keys.
<PVA/PVA+ (Personal Video Analytics>
PVA is our unique name of our video analytics.
11
Advertisement
Table of Contents
