DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Time Range Name
Click the Apply button to accept the changes made for each individual section.
Click the Clear Time Range to remove all the entries.
Power Saving LED Settings
This window is used to add or delete the power saving schedule on the LED of all ports.
To view the following window, click Management > Power Saving > Power Saving LED Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Action
Time Range Name
Click the Apply button to accept the changes made for each individual section.
Click the Clear Time Range to remove all the entries.
Power Saving Port Settings
This window is used to set the power saving state.
To view the following window, click Management > Power Saving > Power Saving Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Action
Time Range Name
Click the Apply button to accept the changes made for each individual section.
Click the Clear Time Range to remove all the entries.
To learn more about the D-Link Green Technologies, go to
Specify the name of the schedule.
Figure 3-46 Power Saving LED Settings window
Description
Use the drop down menu to add or delete the schedule.
Specify the name of the schedule.
Figure 3-47 Power Saving Port Settings
Description
Select the appropriate port range used for the configuration.
Use the drop down menu to add or delete the schedule.
Specify the name of the schedule.
http://green.dlink.com/
55
for more details.