Viewing And Resynchronizing Server Connections; Figure 4.7: Traps Window - Avocent AUTOVIEW 3008 Installer/User Manual

Chapter 4: Web Interface Operations 49
NOTE: After changing SNMP settings, the switch must be rebooted. See Rebooting the switch on page 56 for
more information.
Enabling individual SNMP traps
An SNMP trap is a notification sent by the AutoView switch to a management station indicating
that an event has occurred that may require further attention. By selecting or clearing SNMP traps
from the left column, you can specify what SNMP traps are sent to the management stations by
clicking the appropriate checkboxes in the list. You can use the checkbox next to Enabled Traps to
select or deselect the entire list.

Figure 4.7: Traps Window

Viewing and resynchronizing server connections

The Servers category retrieves and displays the servers in the AutoView switch database as well as
information on how the servers are connected to the selected switch.
The Path column displays the current server connection. This can be to either an IQ module or a
cascaded switch. If connected to an IQ module, the IQ module's ARI port is displayed. If connected
to a cascaded switch, the switch channel is also displayed.