Table 4.5: User Access Level Rights - Avocent AUTOVIEW 3008 Installer/User Manual

42 AutoView 3008/3016 Switch Installer/User Guide
Setting up user accounts
When you select the Users category, the OBWI will retrieve and display a list of usernames and
current access levels from the AutoView switch. From here, you can add, modify or delete users
and assign access levels. The User Administrator and Appliance Administrator access levels allows
you to assign individual server access rights.

Table 4.5: User Access Level Rights

Operations
Preemption
Configure network &
global settings
[security mode, time-
out, Simple Network
Management
Protocol (SNMP)]
Reboot
Flash upgrade
Administer User
Accounts
Monitor server status
Target device access
NOTE: Preemptions listed in the previous table only apply to remote clients. They do not apply to users
accessing the server locally.
Users can become locked out by the Security Lock-out feature if they try to enter an invalid
password five consecutive times. You can configure Security Lock-out settings as well as unlock
any user through the User category.
Modifying users
To add or modify a user:
1. Click the Configure tab in the OBWI, then click the Users category in the left column.
Appliance
Administrator User Administrator
All Equal and lesser
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Yes Yes
User
No
No
No
No
No
No
Assigned by Admin