Figure 4.11: Avriq Versions Window - Avocent AUTOVIEW 3008 Installer/User Manual

AVRIQ versions
The AVRIQ Versions sub-category allows you to view version information for attached AVRIQ
modules. Clicking on the EID displays a window that allows you to upgrade the IQ module
firmware and to reset the IQs if connected to a cascaded device.
Selecting the Enable Auto-Upgrade for all IQs checkbox causes all subsequently connected IQ
modules to have their firmware upgraded to what is available on the AutoView switch. This
guarantees that IQ module firmware is compatible with AutoView switch firmware.
When you select the Versions category, the OBWI will retrieve the firmware versions from the
selected switch. The AVRIQ Versions sub-category allows you to view and upgrade all of the IQ
modules and IACs in the system.
On occasions when a cascaded switch is not recognized by the AutoView switch, it may be
necessary to reset the IQ module which connects the cascaded switch to the AutoView switch. This
can be done using the Reset IQ module button in the IQs sub-category.
To view version information for AVRIQ modules:
1. Click the Configure tab in the OBWI, then click Versions - AVRIQ Versions in the left column.

Figure 4.11: AVRIQ Versions Window

2. Click the EID of the AVRIQ module for which you want to view the firmware version.
Chapter 4: Web Interface Operations 53